Spares & Accessories

High quality vacuum oil suitable for our range of DVP vacuum pumps models LC.4,LB.8,LC.12 and LC.20.

• AVE32 – 1L 
• AVE32 – 5L
• AVE32 – 20L 

High quality vacuum oil suitable for our range of DVP vacuum pumps models LC.25 and LC.40.

• AVE64 – 1L 
• AVE64 – 5L
• AVE64 – 20L 

AVE also supply a full range of high quality vacuum oil for any vacuum pumps including: mineral oils, PFPE vacuum pump oil (including PFPE recycling service), gear box oil and silicon fluids.

• AVE100 – 5L or 20L
• Ultragrade 19 – 1L, 5L, 20L or 25L
• Ultragrade 20 – 1L, 5L, 20L or 25L
• Ultragrade 70 – 5L or 20L
• PFPE (Fomblin) – 1kg or 5kg
• Anderol 555 – 20L
• Silicon Fluid:
  • CVC5 – 5kg
  • CVC4 – 500ml or 1L

This silicone-based clear translucent grey coloured compound is used as sealant and lubricant for vacuum and pressure systems.

• Water-resistant
• Bleed (200 °C, 24 hours) ˂0,5%
• Evaporation (200 °C, 24 hours) ˂2 %
• Has shelf life of 1800 days
• Worked penetration: 230 mm/10
• Unworked penetration: 175 mm/10 to 210 mm/10

Available in:

• 1 x 150g (5.3oz) – single unit
• 8 x 150g (5.3oz) – per case

Wire reinforced clear PVC vacuum hose, lightweight and flexible, strong, Smooth inside and out.

​We stock four bore sizes, available in meter length increments:

• 10mm I.D
• 1/2″ I.D
• 3/4″ I.D
• 1″ I.D

​Unex Hexagon Head Hose Clip – HC14-19

Available in 1 size – Clamping range 14.0 – 19.0 mm (will fit 10mm & 12mm ID vacuum hoses)

Specification:

• Clips will seal at vacuum pressures (unlike Jubilee clips)
• 304 Stainless Steel
• Durable and rust proof
• Hose life often improved due to low friction inner band
• Ideal for use with soft tubing

Certain mixtures and processes require careful degassing otherwise essential volatile components may be removed altering the composition of the mixture. This vacuum regulator is a perfect way to control the vacuum.
Most vacuum regulators regulate the pressure by bleeding air into the vacuum circuit which can be damaging to the vacuum pump as it has to constantly work against the leak in the circuit. This regulator is positioned between the pump and the chamber and precisely controls the vacuum pressure without bleeding any air into the circuit except when the vacuum pressure is decreased using the dial, in which case air briefly enters the circuit through the atmosphere port on the regulator.

Vacuum regulator model IRV20 specification:

• Vacuum gauge
• 1/4″ BSP female threaded ports (1 each side)
• Maximum flow 240 l/min 

​This gauge is used on all our systems as we have found the reliability and quality to be excellent, unlike cheaper gauges offered by many of our competitors. 

Specification:

• Bourdon tube pressure gauge.
• Stainless Steel case.
• Nominal size 63mm diameter.
• Dual scaled to read in bar (outer scale black) and in Hg (inner scale red)
• Range -1 – 0 bar/ -30 – 0 inHg
• Laminated safety glass window.
• Bottom entry connection 1/4″ BSP.
• Connection position – lower mount.
• Accuracy class: class 1.6.

Can be supplied calibrated if required.

​This digital gauge is available to be used on all our systems as an upgrade on the standard dial gauge.

Specification:

• 0.5 % of span accuracy.
• 5 digit LCD display with 12mm character size.
• laser welded stainless steel sensor and socket.
• Nominal size 70mm diameter.
• Dual scaled to read in bar (outer scale black) and in Hg (inner scale red)
• Pressure ranges from -1 to 1600 bar.
• IP67 ingress protection rating.
• Bottom entry connection 1/4″ BSP.
• 9 Engineering units of measure

Can be supplied calibrated if required.

If you are looking for more accuracy in your process then this 100mm (4″) capsule gauge is a great solution. This model is scaled at 0-50mbar for good accuracy in the lower range, but can be supplied in many different ranges.

Specification:

• Bourdon tube pressure gauge.
• Stainless Steel case.
• Nominal size 100mm diameter.
• Range -50 – 0 mbar.
• Laminated safety glass window.
• Bottom entry connection NW16.
• Connection position – lower mount.
• Accuracy class: class 1.6.

Can be supplied calibrated if required.

Fully formed rubber L shaped gasket – NO JOIN, available in nitrile or viton.

Which gasket is right for my application?