Vacuum-Degassing
This 64 litre package testing chamber is to be used in a clean environment so the customer wanted an oil free solution, hence the Venturi vacuum generator and then all of the fittings across the chamber were upgraded to stainless steel for a food safe contaminant free solution as well. The Venturi is capable of […]
This fully customised Bell Jar Vacuum System has had a heat plate installed along with a separate control panel to monitor, as well as control the temperature of the plate inside. For safety reasons the system was fitted with a vacuum switch so that the heater wouldn’t turn on until it was under vacuum. The […]
This nice little system is using two of our motorised stirrers in two DP27 and DP76 vacuum chambers to degas various oil mixtures in the smaller tank and remove air from the pellets in the larger tank before using pressure differential to pull the liquid into the larger tank and fully infuse the pellets with […]
This vacuum system is a very smart piece of tech. even if we say so ourselves. With a vacuum chamber capable of 2 x 10-8 mbar and a smart PLC system fully automating the process this customer can now ditch their old Edwards 306 Autocoaters and process their filaments in record time. The old coaters […]
Sometimes things don’t quite go to plan or plans change, but that is the best thing about engineering, you find a way to make things work and learn from mistakes. Originally this acrylic vacuum chamber was supposed to be working not much below atmospheric pressure and had gloves in to allow the user the ability […]
This HUGE tank was sent on its way recently to be used in degassing large transformers. The vacuum chamber was so large we decided to have some metal pallets made up and mounted it on top for ease of manoeuvrability around the customers facility, plus they look rather striking. This vacuum chamber has a lid […]
Below is the 42Ltr version of our new AVE-STIR-20 variable speed controlled motorised vacuum stirrer. We have these available as an add on for our DP42, DP76 and DP118 vacuum degassing chambers. More info in the AVE stirrer system can be seen here Motorised Vacuum Stirrer | AVE Vacuum-Degassing (vacuum-degassing.com)
This acrylic chamber was designed to simulate atmospheric conditions and pressures at various altitudes and simulate the various altitude profiles of an aircraft taking off and landing at varying rates of ascent and descent. The inlet valves on the sides are to introduce mixtures of gasses and ‘shock’ the system simulating damage to the aircraft’s […]
This vacuum cylinder system is on its way to Canada for use in a lab testing soil samples and much more. The normal system comes with an acrylic lid but due to the nature of some of the chemicals being introduced into the system they required an aluminium replacement. Paired with a DVP LB.6 vacuum […]
This lovely system has made its way out of the workshop this week. It is huge! It dwarfs our ‘standard’ 12″ system by comparison. This system has a custom baseplate to allow for a number of changeable feedthroughs, and attachment points to hold samples in place for the customer’s experiments. Completed with a fully stainless […]
Applied Vacuum Engineering, Units 7-9, Mead Court, Cooper Road, Thornbury, Bristol BS35 3UW
Tel: +44 (0)1454 413561
Applied Vacuum Engineering is the trading name of AVE (1977) LTD. Registered in England No.
9051173
Specialists in vacuum engineering and vacuum pump servicing
Take a look at our other sites here:
© 2024 Applied Vacuum Engineering
AVE standard T's and C's
Website by MJ-WebDesign Ltd.